Jul 17, 2019
PING PRESS RELEASE: PING introduces Glide 3.0 wedges

PHOENIX (July 15, 2019) – In developing the new Glide 3.0 wedges, PING’s engineers took a grip-to-grind approach, re-designing every component of the club to create a higher-spinning, more forgiving, lighter overall design that offers multiple sole grind options to custom-fit golfers of all skill levels.

The tour-proven Glide 3.0 wedges are available for custom fitting and pre-sell beginning today at authorized PING golf shops around the world.

“In the Glide 3.0 series, we’re broadening the appeal of our wedges and providing more differentiation within our own line and the rest of the marketplace,” said John K. Solheim, PING President. “We approached the design with a goal of creating higher-spinning, great-looking wedges that also deliver more forgiveness with the improved feel from our other proven technologies. Every detail in the Glide 3.0 is designed to improve short-game performance, from the longer grip for choking down to the Hydropearl 2.0 chrome finish that helps the wedge glide through the grass.”

“From a fitting standpoint, we engineered four distinctly different sole grinds, including an Eye2 sand-wedge-inspired option, to ensure that trained PING club fitters can properly match a Glide 3.0 to a golfer’s swing and playing conditions,” Solheim said. “We’re excited about getting it into golfers’ hands. It had a win its first week on the PGA Tour when Nate Lashley used one in his amazing and inspiring victory at the Rocket Mortgage Classic.”

 

Improved Feel and Forgiveness

In the Glide 3.0 wedges, PING’s engineers put a premium on the feel and forgiveness by leveraging the multi-material construction that combines a 431 stainless steel head with a larger and softer elastomer Custom Tuning Port (CTP) insert. Similar to the popular i210 irons, the additional volume of the CTP allows for a larger insert covering more of the back of the face, resulting in activation of the elastomer at impact to produce a soft yet solid feel. The new, patented cavity design and larger CTP expand the perimeter weighting to increase the MOI and position the center of gravity higher to yield lower-launching, higher-spinning trajectories for more control.

“The Glide 3.0 wedge is a great blend of a players-style design and game-improvement technology,” said Solheim. “At address, it provides the clean look of a tour-style wedge. We’ve added some offset based on tour player feedback to provide a more captured look. At the same time, we’ve increased the perimeter weighting and improved the feel with the softer insert material to ensure golfers have the forgiveness they need to play with confidence on approach shots. The combination of those attributes really sets the Glide 3.0 wedges apart and gives them a much broader appeal.”

 

 

Precision-Milled Grooves

Patented wheel-cut grooves developed by PING’s engineering and manufacturing teams enable grooves with a sharper edge radius, which increases interaction with the ball at impact, creating more friction for improved spin and trajectory control. The grooves in the lower-lofted wedges (46°, 50° & 52°) are milled with a 20° sidewall and a .005" edge radius for optimal full-shot performance. The higher-lofted versions (54°, 56°, 58° & 60°) feature an extra ½ groove at the bottom of the face for added spin and are milled to a .004" edge radius with a 28° sidewall to impart more spin, especially around the greens.

 

A Focus on Fitting

 With an emphasis on expanding the wedge sole options to better custom-fit golfers, PING engineers crafted four differentiated sole grinds in the Glide 3.0 series. Each is designed to best match a player’s angle of attack and typical turf conditions while providing performance and versatility on full and partial shots around the green. 

“We see tremendous opportunity in wedge fitting in general,” said Solheim. “It starts by focusing our product designs on meeting the needs of golfers of all abilities and swings. With the new sole grinds and multiple loft options, a fitter can really dial in the wedges to help improve the player’s performance based on how they dynamically deliver the clubhead and the type of conditions they typically play in. During the process, they can also determine the best combination of wedges to provide proper distance gaps between each club.”

 

Grind Options:

• Standard Sole (SS) grind (46°/12°, 50°/12°, 52°/12°, 54°/12°, 56°/12°, 58°/10°, 60/10°)

Mid-bounce sole with heel relief. Engineered for golfers with a moderate angle of attack. Exceptional performance in a variety of turf and sand conditions. Fits most golfers.

 

• Wide Sole (WS) grind (54°/14°, 56°/14°, 58°/14°, 60/14°)

Most forgiving through the ground. Round and cambered sole with significant bounce. Recommended for golfers with a steep angle of attack who typically play in soft turf and sand conditions.

 

• Eye2 grind (54°/10°, 56°/10°, 58°/8°, 60°/8°)

With the high toe design pioneered by Karsten Solheim nearly 40 years ago, it matches the original Eye2 SW sole/face profiles and narrow hosel transition for the ultimate in bunker performance and touch shots near the green.

 

• Thin Sole (TS) grind (58°/6°, 60°/6°)

Facilitates precise shot-making and versatility from tight lies. Extreme heel relief with PING WRX-inspired bounce grind. Ideal for firm conditions and a shallow angle of attack.

Lighter Shaft and Grip

 The Glide 3.0 wedge’s grip and shaft have been lightened by six and five grams, respectively, contributing to an overall weight reduction of 15 grams for the entire club. The Dyla-wedge Lite grip, which is ¾-inch longer than a traditional grip and features a reduced taper, allows golfers to choke down for more versatility and trajectory control. The PING Z-Z115 wedge shaft is made by Nippon and custom engineered with a lower balance point closer to the tip to provide lower launch with more control and enhanced feel.

 “The lighter overall weight allows the Glide 3.0 to better blend into a golfer’s full set and help them swing the club easier,” said Solheim. “We’ve also reduced the head weight by approximately four grams while maintaining our traditional wedge swing weights to ensure golfers still benefit from the clubhead feel they need to play with control and precision.”

 

Specifications:

Multi-material construction: 431 stainless steel head, elastomer insert, Hydropearl 2.0 finish

Available in 10 color codes (lie angle). Black is standard.

Swingweight: D2 – D4, depending on loft

Stock grip: PING 360 Dyla-wedge Lite in three sizes (Aqua -1/64", White Std., Gold +1/32")

Stock steel shaft: PING Z-Z115 Wedge made by Nippon

 Stock graphite shaft: Alta CB Red (SR, R, S)

Aftermarket shaft options (no upcharge): True Temper Dynamic Gold 105 (R300, S300), True Temper Dynamic Gold (S300, X100), True Temper Dynamic Gold 120 (S300, X100), Project X LZ (5.0, 5.5, 6.0, 6.5), True Temper XP95 (R300, S300), Nippon Pro Modus Tour 105 (S, X), KBS Tour (R, S, X)

 

For more information, contact Ms. Merashell Dela Chica or Mr. Jomar Pader at +632 850 2455.

 

***PING, Glide 3.0, Dyla-wedge, Alta, i210, Z-Z115, Eye2 and WRX are registered and unregistered trademarks of Karsten Manufacturing Corporation in the U.S. and other countries.  All other trademarks mentioned are the property of their respective owners.

 
 
Mar 24, 2016
PING Press Release: PING G Series #1 Seller in All 4 Categories

PHOENIX (March 22, 2016) – In less than a month on the market, PING G drivers, fairway woods, hybrids and irons were the #1 sellers (units and dollars) in their respective categories for February in the on- and off-course retail channels combined, according to Golf Datatech LLC, which tracks golf equipment sell-thru data for the United States....

read more >>

Mar 1, 2016
Honma, Nike, PING, TaylorMade, Titleist, Yamaha Simul Product Launch at the GOLF FEST

Festival Supermall in Alabang will be the site of a first-ever simultaneous launch of the 2016 premium golf brands on March 10 to 13....

read more >>

Jan 15, 2016
PING Press Release: PING launches G series, plus new category with Crossover line

PHOENIX (January 11, 2016) - Developing knowledge and drawing inspiration from sources as diverse as dragonfly wings and 18-wheelers, PING today launched its new G series of drivers, fairway woods, hybrids and irons, again advancing speed, distance and forgiveness to unprecedented levels without sacrificing other performance attributes. This year PING went one step further, creating a new club category with the G Crossover, combining the best of hybrid and iron technology....

read more >>

Jan 13, 2016
PING Fitting Tips by Coach MIc Que: Size Matters

Q: "Can the size of my grips affect how I hit the ball?"

read more >>

Dec 24, 2015
PING Fitting Tips by Coach MIc Que: Replacements

Q: "How do I know if I need a hybrid?"

read more >>

Dec 10, 2015
PING Fitting Tips by Coach Mic Que: Pool Proof

Q: "Should my edges have the same lie angle as my irons?"

read more >>

Nov 26, 2015
PING Fitting Tips by Coach Mic Que: Not So Flat Stick

Q: "Does the loft of my putter make a big difference?"

read more >>

Nov 12, 2015
PING Fitting Tips by Coach Mic Que: Sole Searchig

Q: "I notice that some wedges have similar lofts but different soles. How do I know which one I need?"

read more >>

Nov 2, 2015
Golf Depot Golf Club Repair and Fitting Center at Orchard Golf & Country Club

We are now at Orchard Golf and Country Club!

read more >>

Oct 29, 2015
PING Fitting Tips by Coach Mic Que: Short and Sweet

Q: "Will I automatically lose distance if I shorten by driver?"

read more >>

 

< Prev 1 2 3 4 5 6 7 8 9 10 Next >